About STATS Group

STATS Group is a specialist engineering company and service provider that operate in the field of piping, pipeline integrity and maintenance. Our comprehensive range of products and services, enable piping and pipeline isolation, intervention, repair, subsea and shutdown services to the oil, gas and petrochemical industries.

 

STATS philosophy is to deliver innovation, value and rapid response to our clients which will:

  • Enhance safety and environmental performance
  • Reduce system or plant downtime
  • Extend facility life

 

STATS Group operates globally through a network of operational bases and project support offices.

On Demand Webinars

21st March 2018

3PM London

10AM New York

Safely Securing and Recovering Caissons

Internal and external lifting tools used to prevent dropped object threat from damaged caissons

Caissons are used in a variety of applications on offshore production platforms and vessels. Common uses for caissons are firewater and seawater lift, drain as well as I-Tube and J-Tube applications. Due to platform life extension, caissons have often been in place longer than planned, and deterioration and failure of caissons is a growing trend in the North Sea and worldwide.

Presented by: Dale Millward, Director of EPRS & Subsea Services


22nd November 2017

3PM London

10AM New York

Subsea Pipeline Repair and Modification

To Depressurise and Remove Hydrocarbons or Not?

To enable new field developments the most cost-effective solution may require a tie-in or connection into existing subsea pipeline infrastructure. When no pre-installed tie-in point exists, it will be necessary to install a new tie-in connection into the pipeline. Ideally the new tie-in connection can be done by disconnecting a pipeline flanged spool and replacing it with a pipeline tie-in, such as a tee or wye spool

Presented by: Dale Millward, Director of EPRS & Subsea Services


07th September 2017

3PM London

10AM New York

Unconventional Applications of Pipeline Isolation Plugs

Utilising Isolation Plugs During All Phases of the Pipeline Life-Cycle

Significant project delays, production outages or impact to the entire production infrastructure are experienced when pipelines are damaged or fail due to a loss of integrity. Pipeline isolation plugs are regularly used to provide fully proven double block isolation, that enables valve replacement or repairs without having to depressurise the entire pipeline.

Presented by: Dale Millward, Director of EPRS & Subsea Services


06th April 2017

3PM London

10AM New York

Reducing Costs And Avoiding Shutdowns During Pipeline Maintenance

Advancements in hot tapping and plugging technology to increase safety and operator efficiencies

Adapting to a sustained low oil price presents pipeline and piping system operators an ongoing challenge of functioning smarter and more efficiently. Operators now balance the need to maintain pipeline integrity while ensuring emergency and scheduled repairs are conducted safely and efficiently.

Presented by: Martin Wilson, Director of Intervention Services & Mark Burton, Technical Director of Intervention Services


22nd Sept 2016

3PM London

10AM New York

Subsea Repair Scenarios of Damaged Pressurised Pipelines

Pressurised pipeline repair facilitated by non-piggable and piggable type approved isolation tools

This webinar will discuss subsea pipeline damage scenarios and repair options available to ensure a safe isolation of the pipeline and contents in the event of an incident. DNV GL type approved isolation technology has been developed to enable the installation of fail-safe, double block and bleed isolation tools, in the event of an unpiggable midline defect.

Presented by: Dale Millward, Director, EPRS & Subsea Services


21st April 2016

3PM London

10AM New York

High integrity isolation for cost effective and safe mid-line repair

Type approved double block and bleed isolation plugs to enable maintenance while the system remains live and at operating pressure

This webinar will describe pipeline isolation tooling and techniques that enable safe modification of pressurised pipelines. Double block and bleed isolation tools have been utilised pre and post-shutdown which enables the shutdown time to be greatly reduced, reducing work scopes, increasing safety and maximising planned duties to be commercially cost-effective to the end user.

Presented by: Dave Vernon, Director, Isolation Services
Dale Millward, Director, EPRS & Subsea Services


5th Nov 2015

3PM London

10AM New York

Safely Securing and Recovering Caissons

Internal and external lifting tools used to prevent dropped object threat from damaged caissons

Presented by: Gareth Campbell, Business Development Manager


15th Sept 2015

3PM London

10AM New York

Leak-tight double block and bleed isolation to reduce risk during pipeline maintenance

BISEP: Double block and bleed pipeline isolation tool

Presented by:Lucas Jarrin, Business Development Manager
Stephen Rawlinson, Vice President, Americas


16th April 2015

3PM London

10AM New York

Pressurised Pipeline Repair enabled by Double Block Isolation Tools

Pipeline intervention and isolation methods potentially without ceasing production.

Presented by: Gareth Campbell, Business Development Manager
Steven Byers, Isolation Services Manager


8th October 2014

3PM London

10AM New York

Emergency Pipeline Repair Systems (EPRS) – Are you ready?

Recent advancements in isolation technology to facilitate the safe repair of unpiggable defects.

Presented by: Dale Millward, Director, EPRS & Subsea Services
Steven Byers, Isolation Services Manager


9th October 2013

3PM London

10AM New York

Maximising shutdown efficiency to minimise risk and downtime

Hot-work barriers, localised hydrostatic testing and onsite machining services to enhance shutdown maintenance

Presented by: Scott Garner, Business Development Manager
Sandy Peter, Process Plant Solutions Manager


  • Subsea pipeline isolation facilitates wye installation to allow platform tie-in

    PLAY

  • World First: Leak-tight Double Block and Bleed Isolation of High Pressure CO2 Pipelines

    PLAY

  • Pipeline Isolation Facilitates Riser Valve Changeout

    PLAY

  • Pipeline isolation facilitates bend removal on live pipeline

    PLAY

  • Emergency pipeline repair isolation system developed to facilitate pipeline repair of unpiggable defects – Scenario 1

    PLAY

  • Emergency pipeline repair isolation system developed to facilitate pipeline repair of unpiggable defects – Scenario 2

    PLAY

  • Emergency pipeline repair system, subsea pipe buckle line replacement

    PLAY

  • Caisson Securing and Recovery

    PLAY

  • Hydrostatic Test, External Pipe End Plugs

    PLAY

  • Hydrostatic Test, In-Line Weld Test Tools

    PLAY